Mighty Skins Drone: How to Apply Them Without Bubbles
Applying a Mighty Skin to your drone can be a satisfying experience, but getting rid of those pesky bubbles can be a challenge. Don't worry, with a little preparation and patience, you can apply your skin flawlessly. Here's how:
1. Preparation is Key:
* Clean your drone: Wipe down your drone thoroughly with a microfiber cloth and isopropyl alcohol. This removes any dirt, dust, or fingerprints that could interfere with the skin's adhesion.
* Warm up the skin: Lay the skin flat on a clean surface and place it under a hairdryer for a few minutes. This makes the vinyl more pliable and easier to work with.
* Trim your skin: If your skin has excess material, trim it to size using scissors or a sharp blade. This helps to prevent wrinkles and bubbles.
2. Application Time:
* Start with a flat surface: Begin by placing the skin on a flat, clean surface.
* Align and center: Position the skin on your drone and align it carefully.
* Apply slowly: Starting from the center, slowly press the skin onto the drone using a squeegee or a credit card. Work your way outwards, smoothing out any wrinkles as you go.
* Smooth out bubbles: If any bubbles remain, use your squeegee to gently push the air out towards the edge of the skin.
3. Final Touches:
* Trim excess: If any excess skin remains, trim it neatly around the edges of the drone.
* Wait for it to dry: Let the skin settle and dry for at least 24 hours before using your drone.
Tips for Preventing Bubbles:
* Go slow: Don't rush the process. Take your time and apply the skin carefully and gradually.
* Don't over-stretch: Avoid pulling or stretching the skin too much, as this can cause wrinkles and bubbles.
* Use a hairdryer: If you find a stubborn bubble, use a hairdryer to gently heat the area and make the vinyl more malleable.
* Keep your hands clean: Avoid touching the adhesive side of the skin with your bare hands, as this can leave fingerprints or oils that can interfere with the adhesion.
Remember: If you're still struggling with bubbles, Mighty Skins offers a satisfaction guarantee. Don't hesitate to contact their customer support for assistance.
By following these steps and tips, you can apply your Mighty Skins drone skin without any bubbles and enjoy a smooth, sleek finish.